Due to COVID-19, our Online store is expecting delays in overseas shipments and couriers in NZ

So please expect some orders and shipments to have some delays.

Please feel free to contact us to check avalibilites in stock and to ask any questions. 

PAL 2000 LED for Fibreglass pools
The PAL2000 are manufactured using high quality moulded thermoplastic with a range of unique features. Supplied with transformer and colour changing LAU LED globe. LAU globes have 6 single colours and 2 colour change modes to choose from as well as 3 selectable default modes.
Colour Lock LED Globes. Can provide 6 fixed colours, 2 colour effects and 3 Selectable Start Colours.
Compact Size. 84mm Diameter.
Flush Fit to Pool Wall.
Even Light Distribution, moulded prismatic lens.
Long Life Lamp. No Tools Required to remove the light from the water.
Non Leak Water Seal.
"Clip-On" coloured lenses. Blue, Green, Red & Orange
Select Currency
NZ$ 655.50 including GST
Purchase Qty:

Installation Instructions for PAL-2000R Retractable Fitting in Fibreglass Pool's/Spa's and above Ground Pools

  1. Locate the position for mounting the PAL-2000R fitting at the centre of one end of the pool or the centre of both ends if required. If the pool is an irregular shape the fitting should be located in a position to obtain the best light spread in the pool. The fitting should be placed 300mm below the water level or 450mm below the top of the pool to enable the retractable part of the fitting to be taken out of the pool if the lamp in the PAL-2000 has to be replaced.
  2. Drill a 60mm mounting hole (60mm to 65mm) at the selected location. After the hole is cut out, clean the area around the hole to remove rough spots and dust.
  3. Fit the PAL-2000 fitting in the hole ensuring the rubber seal is fitted at the between the back of fitting and the pool/spa wall as shown in the diagram. Place a bead of silicon between the nut and the wall then tighten up the nut firmly.
  4. The PAL-2000 Transformer is IP64 and can be mounted in the pool zone. Find a suitable position to mount the transformer ensuring it is a minimum of 1.2m above the maximum water level and the transformer must be installed to comply with AS3000.

Other products you might be interested in

  • PAL Colour changing LED Upgrade Lamp
    NZ$ 194.35 EA
    View / Add
  • PAL 2000 Stainless Dress Rim - Concrete
    NZ$ 47.15 EA
    View / Add
  • PAL 2000 Stainless Dress Rim - Fibreglass
    NZ$ 47.15 EA
    View / Add
  • PAL 2000 Moulded Housing - 4 Wire
    NZ$ 21.85 EA
    View / Add
  • LED PAL 2000 for Concrete Pools
    NZ$ 655.50 EA
    View / Add